1. What you need to do at the very beginning ...
Buy a router ... The first thing you do is connect all computers to the LAN ports to the router (connect the LAN port of the router with an Ethernet cable to the LAN port of your network card). Usually a LAN port of at least 4 on most router models. Included with the router is at least 1 Ethernet cable (regular twisted pair), respectively, Router Ip Address it will be enough for you to connect one computer. If you have more: do not forget to buy Ethernet cables in the store along with the router. Your Ethernet cable through which you were connected to the Internet (before it was most likely connected directly to the network card of the computer) - you should plug it into the router's socket under the name WAN (sometimes called Internet).
After turning on the power supply of the router - the LEDs on the case should start blinking (if you have, of course, connected the cables).In principle, you can now proceed to customize Windows.
2. Determination of IP address and password with login to enter the settings of the router (examples ASUS, D-LINK, ZyXel)
The first configuration of the router must be made on a stationary computer connected to it via an Ethernet cable. In principle, it is also possible with a laptop, only then you can connect it via cable anyway, configure gateway ip address it, and then you can switch to a wireless connection ...This is due to the fact that by default, the Wi-Fi network can be turned off altogether and in principle you cannot enter the settings of the router.
2.1. Windows Setup
First we need to configure the OS: in particular, the Ethernet network adapter through which the connection will go Admin Panel.To do this, go to the control panel in the following way: "Control Panel \ Network and Internet \ Network and Sharing Center". Here we are interested in the “change adapter settings” link (located on the left in the column if you are running Windows 7, 8).
Next, go to the properties of the Ethernet adapter, as in the picture below.
2.2. How to find the address of the router settings page
And so, launch any browser installed on your computer (Internet Explorer, Chrome, Firefox). Next, enter Correct IP address of the settings page of your router into the address bar. Usually this Router address is indicated on the accompanying Admin password documentation for the device. If you do not know, here is a small sign in with popular models of routers. Below we consider another way. Table of how to login
If you manage to log in, you can Login Page proceed to the settings of your router. You may be interested in articles on configuring the following routers:
2.3. If you could not login to
There are two ways ...1) Enter the command line (in Windows 8, you can do this by clicking on “Win + R”, then in the “open” window that opens, enter “CMD” and press the Enter key. In other OSs, you can open the command 192.168.l.l Admin line through the “start” menu ").
Next, enter a simple command: “ipconfig / all” (without quotes) and press the Enter key. Before us should appear all the network operating system settings.We are most interested in the line with the “main gateway”. 2) If nothing helps - you can simply reset the settings of the router and bring it to the factory settings. To do this, there is a special button on the device case, in order 192.168.l.l Admin press it, you need to try: you need a pen or a needle ...